363 SHOT
The 363 SHOT is CGM's response to the motorcyclist who aims to a race-oriented helmet. The outer shell and the innovative rear spoiler have been designed to maximize the aerodynamic efficiency at high speed. It is realized in two measures of outer shell, with an inner helmet thermoregulation system, it's composed by three channelings areas which guarantees a continuous air flow. The external visor, predisposed for Pinlock 70, is tilting and for a perfect adherence to the double perimeter seals, along with the lock in closed position, it ensures quietness and driving comfort. The 363 is also equipped with hidden sunvisor. The linings compartment is composed by hexagonal thermoformed top, ExtraCool linings, high visibility bands, nose and chin deflector and SOS RELEASE SYSTEM which allows a quick release of the cheek pads in case of emergency.
SIZES
XS-S-M-L-XL-XXL
ECE-R 22.06 HOMOLOGATION
Average weight size M 1550 +/- 50gr
2 SIZES OF EXTERNAL SHELL
SHELL IN HPT
AIR STREAM SYSTEM
Long visor with antiscratch treatment
Quick release visor
VISOR LOCK IN CLOSED POSITION
TILTING VISOR
HIDDEN SUN INNER VISOR
Removable inner lining
Removable cheek pads
THERMOFORMED INNER LINING
EXTRACOOL INNER LINING
HIGH VISIBILITY INNER LINING
Chin deflector
Nose deflector
RETENTION SYSTEM
ELASTIC STRAP LOOP
PREPARED FOR GLASSES USE
Intercom set up
PINLOCK PREPARED
GALLERY
2 SIZES OF EXTERNAL SHELL
To realize models in different sizes of external shell allows to give a fit and a very good comfort fitting for all the sizes. The shell of reduced dimensions is useful to cover the smaller sizes, on the contrary the shell of bigger dimensions allows to cover the bigger sizes. A shell specially realized for some sizes allows to avoid an excessive encumbrance when the helmet is worn on.
EXTRACOOL INNER LINING | HIGH VISIBILITY INNER LINING
The EXTRACOOL linings are realized with a new fabric with an innovative design, it is breathable and antibacterial and extremely soft on skin.
The high visibility inner linings are made with inserts or bands in reflective material or in fluo colours to make the helmet more visible, increasing passive safety.
SOS RELEASE SYSTEM
The SOS RELEASE SYSTEM allows to quickly remove the cheek pads, in an emergency, while the helmet is worn. By pulling the emergency red strips, the pressure buttons will release and the cheek pads extraction from the lower part of the helmet will be possible. This system must be used only in case of emergency.
PINLOCK PREPARED | HIDDEN SUN INNER VISOR
The visor includes specific pegs for inserting the Lens Pinlock® against the fogging of the visor which could happen due to the breath and to the difference of inner temperature and external temperature of the helmet. Pinlock® has developed for CGM a unique Lens Pinlock® 70 (DKS002) available in different colorings for different kind of weather conditions.
The darken hidden inner visor acts as a sunscreen handy and easy to use. It is enough to lift it down to use it or to lift it up to exclude it from the visual field and go back to a traditional visual.
AIR STREAM SYSTEM
The ventilation system AIR STREAM SYSTEM is made by resealable front air vents, air ducts inside the inner shell and rear extractor. The fresh air comes in from the front air vent of the helmet and, by coming through the apposite channeling, goes right to the pilot. The air circulation is generated by the exploitation of the movement that creates a negative pressure and push the inner hot air towards the rear part of the helmet, here the hot air comes out from the rear vents. In this way the pilot benefits from a constant air recycle that always guarantees a comfortable temperature.
COLORS
